/
FDNYD5-250 | Nylon Insulated Female Quick Disconnects – 12-10 AWG
Quick disconnects create a splice when fitted together to easily connect or disconnect without causing damage to the terminal or insulation. Double crimp terminals are built with an additional inner copper barrel which: 1. Substantially reduces the strain on the wire strands. 2. Transfers strain to the wire jacket. 3. Provides a stronger connection. Double crimp terminals prevent wire terminations from becoming loose under stress or pulled out of the terminal, particularly in areas where vibrations are present.
Part #: FDNYD5-250
12-10 AWG
| T | L | F | B | W | D | C |
| 0.4mm (0.02″) | 23.5mm (0.93″) | 7.5mm (0.30″) | 13mm (0.51″) | 6.6mm (0.26″) | 6.3mm (0.25″) | 3.4mm (0.13″) |
Product Spotlight
- UL Approved, CE Certified, RoHS Compliant, DIN Approved
- Temperature & Voltage Rating: 75ºC 300 Volts
- Tin Plated Copper
- Nylon Insulation
- Double Crimp
- Maximum Electrical Current: 24AMP
- Nema Tab: 0.8mm x 6.35mm x (0.032″ x 0.250″)
- Clear package labeling for easy identification and re-ordering
Related Products
FDT10010D | Crimping Die – Insulated Terminals – 26-10 AWG
Crimping Die for Insulated Terminals (Ring, Spade, Pin, Snap Plug, Piggy Back, etc.)
FDT10011D | Crimping Die – Insulated Terminals – 22-10 AWG
Crimping Die for Insulated Terminals (Ring, Spade, Pin, Snap Plug, Piggy Back, etc.)
FD110K | Pneumatic Crimping Press – Output Force: 1.8 Tons
"Plug 'n Play" Pneumatic Press with interchangeable crimping dies. Quick and easy to install, easier to operate. This FD110K press is offered as a complete kit, which includes a press, foot pedal, air tubing and one 22-08 AWG crimping die for ferrules.
QCD3C | Crimping Die – Insulated Terminals – 22-10 AWG
Our Snap-N-Crimp dies can easily be swapped in and out within the same tool frame for quick and efficient crimping, We have a large selection of die set available to suit a wide variety of crimping needs.
FDT10010 | Insulated Terminal Crimping Tool – 26 to 10 AWG
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com.
FDT10011 | Insulated Terminal Crimping Tool – 22 to 10 AWG – Standard Handles
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com.
FDT10012 | Insulated Terminal Crimping Tool – 22 to 10 AWG – Long Handles
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com.
KST2000A | UL Approved 22-10 AWG Insulated Terminal Crimping Tool
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com.
KST2000B | UL Approved 22-10 AWG Double Crimp Insulated Terminal Tool
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com.
