/
DBVES5-14 | Vinyl Insulated Flat Blade Terminals – 12-10 AWG
A flat blade terminal, either insulated or non insulated, is a type of single wire connection using a flat conductive blade which is inserted into a blade receptacle. These terminals are designed to match interconnect requirements for components such as timers, motors, valves, relays, mechanical switches and wire to wire harnesses.
Part #: DBVES5-14
12-10 AWG – Yellow
| T | L | F | E | W | D | D1 |
| 1mm (0.04″) | 28.1mm (1.11″) | 14mm (0.55″) | 14.1mm (0.55″) | 4mm (0.16″) | 6.4mm (0.25″) | 3.4mm (0.13″) |
Product Spotlight
- UL Approved, CE Certified, RoHS Compliant, DIN Approved
- Maximum Electrical Rating: 105ºC 600 Volts
- Maximum Electrical Current: 50AMP
- Copper Material, Vinyl Insulation
- Clear package labeling for easy identification and re-ordering
Related Products
FDT10010D | Crimping Die – Insulated Terminals – 26-10 AWG
Crimping Die for Insulated Terminals (Ring, Spade, Pin, Snap Plug, Piggy Back, etc.)
FDT10011D | Crimping Die – Insulated Terminals – 22-10 AWG
Crimping Die for Insulated Terminals (Ring, Spade, Pin, Snap Plug, Piggy Back, etc.)
FD110K | Pneumatic Crimping Press – Output Force: 1.8 Tons
"Plug 'n Play" Pneumatic Press with interchangeable crimping dies. Quick and easy to install, easier to operate. This FD110K press is offered as a complete kit, which includes a press, foot pedal, air tubing and one 22-08 AWG crimping die for ferrules.
FDT10010 | Insulated Terminal Crimping Tool – 26 to 10 AWG
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com.
FDT10011 | Insulated Terminal Crimping Tool – 22 to 10 AWG – Standard Handles
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com.
FDT10012 | Insulated Terminal Crimping Tool – 22 to 10 AWG – Long Handles
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com.
