/
MPNYDL2-156 |Nylon Insulated Male Bullet Connector – 16-14 AWG
Tin-plated copper male and female insulated bullet connectors fit to form a fully insulated in-line splice that helps prevent shorting or flash-over when disconnected with the power on.
Part #: MPNYDL2-156
16-14 AWG
| C | L | F | B | W | D |
| 2.3mm (0.09″) | 24mm (0.95″) | 10.5mm (0.41″) | 11mm (0.43″) | 4mm (0.16″) | 5mm (0.20″) |
Product Spotlight
- UL Approved, CE Certified, RoHS Compliant, DIN Approved
- Temperature & Voltage Rating: 105ºC 600 Volts
- Tin Plated Copper
- Double Crimp
- Nylon Insulated
- 15 AMP
Related Products
FDT10010D | Crimping Die – Insulated Terminals – 26-10 AWG
Crimping Die for Insulated Terminals (Ring, Spade, Pin, Snap Plug, Piggy Back, etc.)
FDT10011D | Crimping Die – Insulated Terminals – 22-10 AWG
Crimping Die for Insulated Terminals (Ring, Spade, Pin, Snap Plug, Piggy Back, etc.)
FD110K | Pneumatic Crimping Press – Output Force: 1.8 Tons
"Plug 'n Play" Pneumatic Press with interchangeable crimping dies. Quick and easy to install, easier to operate. This FD110K press is offered as a complete kit, which includes a press, foot pedal, air tubing and one 22-08 AWG crimping die for ferrules.
QCD3C | Crimping Die – Insulated Terminals – 22-10 AWG
Our Snap-N-Crimp dies can easily be swapped in and out within the same tool frame for quick and efficient crimping, We have a large selection of die set available to suit a wide variety of crimping needs.
FDT10010 | Insulated Terminal Crimping Tool – 26 to 10 AWG
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com.
FDT10011 | Insulated Terminal Crimping Tool – 22 to 10 AWG – Standard Handles
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com.
FDT10012 | Insulated Terminal Crimping Tool – 22 to 10 AWG – Long Handles
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com.
