/
NT15008 | High Temperature Wire Ferrules
Our High Temperature Wire Ferrules are made of untinned copper with a flared end for easy wire entry.What is a wire ferrule? A wire ferrule is a tinned (or untinned) copper sleeve, which is slipped over stranded wire and then crimped. This creates a solid connection for insertion into terminal block housings or various other applications. The crimped ferrule provides a sturdy connection that limits wire fraying and increases the life of the conductor. Our ferrules are sold in packages, strips, and also in reel form.
1.50mm² (16 AWG) – Untinned Copper
| L1 | D | D1 | D2 |
| 8.0mm (0.315in) | 2.0mm (0.079in) | 1.7mm (0.067in) | 2.5mm (0.098in) |
Product Spotlight
- Untinned Copper for High Temperature Applications
- UL Approved, CE Certified, RoHS Compliant, DIN Approved
- Maximum Electrical Rating: 2000 Volts
- Clear package labeling for easy identification and re-ordering
- Ratcheting tool with trapezoidal impression w/ 24-10AWG range
Related Products
FD2212UL | Crimping Tool for Use with UL Approved Wire Ferrules
Self-Adjusting, High Performance Crimping Tool
FD2410N-20 | Crimping Tool – 20mm wide Crimping Die
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com.
FD2210L | Crimping Tool – Long Handle – Trapezoidal Profile – 22-10AWG
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com.
FD2210DL | Crimping Tool – Long Handle – 22-10 AWG
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com. This particular crimping tool is designed with long handles, multiple slots and parallel crimping for more accurate wire terminations.
MFT1 | Multifunction Tool – Cut/Strip/Crimp – Trapezoidal Profile
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com. This particular versatile and lightweight multifunction tool cuts, strips and crimps stranded wires ranging in size from 22 to 10 AWG.
FD2210HFT | Ratchet Crimping Tool – Twin Wires – Parallel Crimping
The crimping tools listed in this category represent the most extensive selection of crimping tools for ferrules in the United States. If it is not here, you probably don't need it. If you can't find the tool you are looking for, give us a call at 703-421-2805 or send us an email message at support@ferrulesdirect.com.
FD110K | Pneumatic Crimping Press – Output Force: 1.8 Tons
"Plug 'n Play" Pneumatic Press with interchangeable crimping dies. Quick and easy to install, easier to operate. This FD110K press is offered as a complete kit, which includes a press, foot pedal, air tubing and one 22-08 AWG crimping die for ferrules.
FD64K | Pneumatic Press for Wire Ferrules – Square Crimping Profile
"Plug 'n Play" Pneumatic Press with square crimping head for ferrules. Quick and easy to install, even easier to operate. To install this FD64K, simply insert tubing in the designated ports, as marked on the press and foot pedal, then set air pressure to 80-100 PSI. Rotate knob clockwise or counterclockwise to decrease/increase opening size of crimping head and start crimping.
QCD1A | Crimping Die – Ferrules – 22-12 AWG
Our Snap-N-Crimp dies can easily be swapped in and out within the same tool frame for quick and efficient crimping, We have a large selection of die set available to suit a wide variety of crimping needs.
FD2808SQ | Crimping Tool – Square Profile – 0.08-16mm2 (28-6 AWG)
Frontal Crimper - Self adjusting, high performance crimping tool
FD2810SQ | Crimping Tool – Square Profile – 28-10 AWG
Side Crimper - Self adjusting, high performance crimping tool.
FD2810UL | Crimping Tool for Use with UL Approved Wire Ferrules
Self adjusting crimping tools - For use with UL wire ferrules
QC1A | Snap-n-Crimp Tool – 22-12 AWG Wire Ferrules
The Snap-n-Crimp tools listed below are offered with already installed individual die sets to satisfy the end user's current needs. Additional die sets can be purchased separately to meet future application requirements.
FD2810HX | Crimping Tool – Hexagonal Profile – 28-10 AWG
Self adjusting crimping tools - For use with UL wire ferrules.
